in the EPDG-H ?

General Information:
Automatic capacitance inductance tester is specially developed for problems existing in substation field measurement of capacitance value of capacitor, it solved the following problems:
(1) Field measurement capacitor needs dismantling cables, not only the big workload but also easy to damage the capacitor.
(2) Low capacitance meter output voltage causes the fault detection rate is low.
The instrument has characteristics of small measured workload, fast and simple, stable performance, high measurement accuracy, high fault detection, etc.
(3) Reactor inductance measurement.

Technical Specifications:


Measurable capacitance range: 0. 1μF 3,300μF

Measurable capacity range: 5 20,000kvar

Measurement accuracy: ±(1.0% readings +0.02μF

Resolution: 0.001μF


Current measurement range: 020A

Measurement accuracy: ±(3.0% readings +0.05A

Resolution: 0.01A


Inductance measurement range:

Small inductance mode 0.1mH5mH

Large inductance mode 5 mH50H

Inductive reactance measurement range: 50mΩ~20KΩ

Measurement accuracy: ±(3.0% readings +0.05mH)

Resolution: 0.01mH

Resistance measurement:

Resistance measurement range:

Small resistance mode 50mΩ

Large resistance mode 1Ω20KΩ

Measurement accuracy: ±(3.0% readings +0.05Ω)

Resolution: 0.01 Ω

Power supply:

Rated voltage: power frequency 220V±10%

Rated frequency: 50Hz

Rated output: 2V/20V/500VA

Working condition:

Environmental temperature:

-10 ~ +50

Relative humidity: ≤90%


370×260×220 mm / 15 kg